Bresser Wind Gauge Pro, Инструкция по эксплуатации

Страница: 15 / 52

15 / 52
6. Fix the mounting rod to the mounting base with a thin
partially threaded screw and a nut.
7. Place the mounting base with its bottom site first on a
wooden element and fix it with 4 suitable wood screws.
Assembly on a vertical or horizontal tube
8. Repeat steps 1 to 6 as before.
9. Place the mounting base with its bottom site first on
the tube and press the tube clamp (counterpart)
against the tube from the opposite site.
10. Slide 4 screws through the bore holes of the mounting
base and through the bore holes of the tube clamp on
the other site.
11. Put on the 4 nuts and tighten the screw connection by
hand.
13 Automatic time setting
After the power supply was established, the clock will auto-
matically search for the radio signal. It takes about 3-8
minutes to complete this process.
If the radio signal is received correctly, the date and time
will be set automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the
following steps:
1. Press RCC button on the base station until radio signal
symbol flashes.
2. If the device is still not receiving the signal, the time
must be set manually.