Bresser Wind Gauge Pro, Инструкция по эксплуатации

Страница: 12 / 52

12 / 52
7 Alarm enabled 8 Reception symbol for outdoor
sensor
9 Outdoor temperature alarm en-
abled
10 Outdoor temperature
11 Sensor symbol 12 Outdoor humidity alarm enabled
13 Humidity outdoors 14 Weather forecast
15 Information on 'feels like' tem-
perature, wind chill, dew point
and heat index
16 Type of wind speed (Avg=aver-
age, Gust=current gust)
17 Wind speed 18 Top wind speed (hourly, daily,
monthly, yearly)
19 Wind speed alarm enabled 20 Wind speed classification (light,
moderate, strong, storm)
21 Indoor humidity 22 Indoor humidity alarm enabled
23 Indoor temperature 24 Indoor temperature alarm en-
abled
9 Before starting operation
NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices,
the following points must be observed during commission-
ing.
1. Place the base unit (receiver) and sensor (transmitter)
as close together as possible.
2. Connect the power supply to the base unit and wait un-
til the indoor temperature is displayed.
3. Establish power supply for the sensor.
4. Set up/operate the base unit and sensor within the ef-
fective transmission range.
5. Make sure that the base unit and the radio sensor are
set to the same channel.