26
Subsequently, the main unit will attempt to receive the DCF77 radio sig-
nal. The reception symbol flashes. When the time signal is received after
3-5 minutes, the current time and date appear in the display. The recep-
tion symbol will now be shown permanently in the display. Date and time
are automatically updated daily at 2:05 o’clock (CET) by the main unit.
Temperature and humidity
Once the batteries are installed the main unit will start displaying the in-
terior measurement information. The main unit will display the informa-
tion from the remote sensor for the first time approximately 3 minutes
after the power supply was established.
ComFoRT LEVEL
humidity is same or lower than 40%
humidity is same or higher than 70%
humidity is higher than 40% but lower than 70%; at same time, the
temperature is higher than 20°C (68°F), but lower than 27°C (80.6°F)
max/min records of temperature and humidity
1. Pressing and releasing the UP button in short intervals repeatedly
makes the display alternate between the current temperature and hu-
midity as well as MIN/MAX recordings.
2. In MIN/MAX temperature display mode, hold UP button to reset all
indoor and outdoor MIN/MAX records to current values.
3. The MIN/MAX temperature and humidity values will be recorded
automatically.
4. The MIN/MAX temperature and humidity records automatically will
be reset at 0:00 o’clock (12:00 a.m.) every day.
CURRENT WEAThER AND WEAThER TREND
The weather forecast is depending on the fluctuation of temperature
and humidity. From these values a weather forecast for the next 6
hours is calculated.
Current weather
Sunny
Partly Cloudy
Cloudy
ANL7007500_7007501DEGB1115BRESSER.indd 26
14.12.15 13:27
