Bresser Quadro Individio, Инструкция по эксплуатации

Страница: 14 / 44

14 / 44
11. Remove the battery compartment cover.
12. Insert the batteries into the battery compartment.
Make sure that the batteries are correctly aligned (+/-
poles).
13. Move CH slider to the position for the desired transmis-
sion channel (setting CH1, CH2 or CH3 with indication
on the display).
NOTE: When operating an outdoor sensor, channel 1 is
recommended as the default setting.
14. Replace the battery compartment cover.
9 Automatic time setting
After the power has been restored, the unit automatically
searches for the radio signal. It takes approximately 3-8
minutes for this process to be completed.
If the radio signal is received correctly, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:
1. Press the DOWN button for approx. 2 seconds to initi-
ate the reception of the radio signal again.
2. Press the DOWN button for approx. 2 seconds to initi-
ate the reception of the radio signal again.
3. If still no radio signal is received, the time must be set
manually.