Bresser Quadro Individio, Инструкция по эксплуатации

Страница: 13 / 44

13 / 44
8 Power supply
NOTICE! The base unit can be operated both with the sup-
plied power adapter or with batteries.
Base unit
1. Press and hold the locking button on the adapter fix-
ture of the AC power adapter. At the same time, insert
the desired plug adapter into the adapter fixture and
screw it in as far as it will go in the "LOCK" direction .
Release the locking knob.
2. Insert the DC barrel connector into the connection
socket on the base unit.
ATTENTION! Make sure that the plug adapter is firmly
and securely fastened in the adapter fixture of the AC
power adapter before proceeding!
3. Insert the AC power adapter with the previously moun-
ted the plug into the power outlet.
4. The device is powered on directly.
5. Wait until indoor temperature is displayed on the base
unit.
6. To replace the plug adapter, hold down the locking but-
ton and turn the plug adapter in the "OPEN" direction
and remove it from the adapter holder. Then perform
step 1 to mount another plug adapter.
NOTE: Alternatively, operation using batteries (2 x AAA/
LR03) is also possible. To do this, proceed as follows:
7. Remove the battery compartment cover.
8. Insert batteries into the battery compartment. Make
sure that the batteries are correctly aligned (+/- poles).
9. Replace the battery compartment cover.
10. Wait until indoor temperature is displayed on the base
unit.
Wireless sensors