GB
INSTRUCTION MANUAL
BR-S36 RGB
LED Panel Light
Art. No.: F004360
GENERAL WARNINGS
RISK OF PHYSICAL INJURY!
Do not use in the presence of children or animals. Store out of reach
of children and animals.
DANGER OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the device.
The device could be knocked over.
Only use the recommended power cable or the recommended
battery for the power supply!
The manufacturer assumes no liability for voltage damage caused
by the use of an unsuitable voltage supply!
DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power
source (power adapter). Only use the device as described in the
instructions. Otherwise there is a RISK of ELECTRIC SHOCK.
Never bend, squeeze or pull power cables, connecting cables,
extensions or connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with
damaged electrical parts! Damaged parts must be replaced
immediately by an authorized service agent.
Operate the device only in a completely dry environment and do not
touch the device with wet or damp body parts.
RISK OF GLARE!
Make sure that people and animals do not look into the light. The
high luminosity can cause glare to the eyes and afterimages. This
impairment of vision can lead to accidents.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and
ensure that it is stored in a reasonably safe place.
• Keep children and animals away from the device! They could knock
the device over.
• Make sure that no one can trip over connection cables. The device
could be knocked over.
• Do not expose the device to high temperatures. Do not short-
circuit the device or dispose of in fire! Excessive heat and improper
handling can cause short circuits, fires and even explosions!
• Only use the recommended power adapter*!
IMPORTANT NOTE!
Never take the device apart. In the event of a defect, please contact
your dealer. They will contact the Service Centre and can arrange the
return of this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the
appliance is not in use, in case of a longer interruption of operation
and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power
supply at any time. The power outlet should always be near your
appliance and should be easily accessible, as the plug of the power
cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug
and never pull the cable!
Do not subject the device to excessive vibrations.
INFORMATION ABOUT THE PRODUCT
Thank you for purchasing this product. The LED studio lights consist
of high-quality LED light-emitting diodes. The LED light-emitting
diodes generate less heat and prevent damage from overheating.
This increases the service life of the LED lights. The product body is
made of high quality aerospace aluminum.
EC DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the
applicable directives and corresponding standards has been
prepared by Bresser GmbH. The full text of the EU declaration
of conformity is available at the following internet address:
www.bresser.de/download/F004360/CE/F004360_CE.pdf
WARRANTY & SERVICE
The regular guarantee period is 2 years and begins on the day of
purchase. To benefit from an extended voluntary guarantee period
as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on
extending the guarantee period and details of our services at www.
bresser.de/warranty_terms.
www.bresser.de/warranty_terms
Содержание BR-S36 RGB
Страница 3: ......
