3. Plug the Euro plug (16b) of the mains cable (16) into the
mains socket.
USING V-MOUNT BATTERIES*
(optional)
1. Slide the fully charged batteries* (2 pieces of type NP-F750
or NP-F960) into the battery holder (4) from above so that
the battery clicks into place.
2. To remove, slide the battery out of the holder in the
opposite direction.
TURNING THE LED LIGHT ON
1. Establish the power supply for the device (insert battery or
connect to mains voltage).
2. Press the on/off button (12) to switch on the device.
3. Press the on/off button (12) again to switch off the device.
BRIGHTNESS ADJUSTMENT
1. Press the "DIMMER/COLOR" button (13).
2. When the corresponding function light "DIMMER" (28)
lights up brightly, you can adjust the brightness by turning
the adjustment knob (13).
COLOR TEMPERATURE ADJUSTMENT
1. Press the "DIMMER/COLOR" button (13).
2. If the corresponding function light "COLOR" (27) lights
up brightly, you can set the color temperature (32 to 56 /
corresponds to 3200K to 5600 K) by turning the adjustment
knob (13).
ADJUSTING THE RGB COLORS
1. Press the "MODE" button (5).
2. When the corresponding function light "CCT/RGB" (26)
lights up brightly, you can set the desired RGB color (0 to
360) by turning the adjustment knob (13).
SETTING A CHANNEL
1. Press the Channel button (6).
2. The last set channel (0-99) flashes.
3. Set the desired channel (0 to 99) by turning the adjustment
knob (13).
4. Finally, press the Channel button (6) to save the set channel.
REMOTE CONTROL
USING THE 2.4G REMOTE CONTROL
1. Press the on/off button (19) to switch on the device.
2. Long press the power button (19) to turn off the device.
SCROLL THROUGH THE MENU
Press the menu button (21) to scroll through the menu.
Press 1x = Display 10 "Brightness"
10 = 10%
press 2x = display 56 "color temperature"
56 = 5600K
Press 3x = display 01 "channel"
01 = 1
Choosing a channel
1. Press the menu button (21) three times to get to the
channel menu.
2. Press + or – (20/22) to select the desired channel.
3. Press the menu button (21) to confirm your selection.
SWITCH LIGHT ON/OFF
1. By default, the light status of the selected channel is
"OFF".
2. Press the on/off button (19) to turn on the light.
3. Long press the on/off button (19) to turn off the light.
ADJUSTING THE BRIGHTNESS
1. By default, the brightness level is 10% when the device
is turned on.
2. Press the + or – button (29/22) to increase or decrease
the brightness.
SETTING THE COLOR TEMPERATURE
1. Press the menu button (21) to select the color temperature
for the current channel.
2. Press + or - button (20/22) to choose the desired color
temperature.
ADJUSTING THE TILT ANGLE
1. Hold the light and slowly loosen the tilt pivot locking screw
(2).
2. Bring the lamp head into the desired position and hand-
tighten the locking screw (2) again.
MOUNTING ON A TRIPOD*
(optional)
1. Loosen the fastening screw (8) for the tripod connection (9)
so far that the opening of the tripod connection is exposed.
2. Place the light with the opening of the tripod connection on
the spigot adapter* of a tripod* and tighten the fastening
screw.
DISPOSAL
Dispose of the packaging materials by type. Observe the
current legal regulations when disposing of the device!
Information on proper disposal can be obtained from municipal
waste disposal service providers or the Environmental Agency.
Do not dispose of electronic devices in the household waste!
According to the European Directive 2002/96/EU on Waste Electrical
and Electronic Equipment and its transposition into national law,
used electrical equipment must be collected separately and recycled
in an environmentally sound manner.
According to the regulations for batteries and accumulators,
disposal in normal household waste is expressly prohibited.
Please make sure to dispose of your used batteries as required
by law — at a local collection point or in the retail market.
Disposal in domestic waste violates the Battery Directive.
Batteries that contain toxins are marked with a sign and a
chemical symbol.
Cd¹
Hg²
Pb³
1 Battery contains cadmium
2 Battery contains mercury
3 Battery contains lead
TECHNICAL DATA
Model
BR-S36 RGB
Power Output
36W
Luminous flux
360LM
Number of LEDs
white: 180 pcs.
colored (RGB): 81 pcs.
Colour temperature
3200K-5600K
stepless adjustment
Light source
0.5W SMD LED/1.5W RGB LED
Color rendering index (CRI)
≥
95
Dimmer
10-100%
Remote control
99 channels,
2.4G wireless remote control
Remote control distance
>50M
Lithium battery* type
NP-F750/NP-F960 (2 pcs.)
Power input
DC13-19V
AC adapter:
DC15V 2.4A (barrel connector)
Size (Including U Bracket)
242x191x42mm
*not included with the purchase
Содержание BR-S36 RGB
Страница 3: ......
