Bresser 7004200, Инструкция по эксплуатации

Страница: 12 / 32

12 / 32
1. Press and hold the UP button for 2 seconds to re-initial-
ize RC signal receiving.
2. Is the device still not receiving the signal, the time must
be set manually.
10 Manual time setting
1. Press the SET button for approx. 3 seconds to enter the
time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the SET button to confirm and switch to the next
setting.
5. Order of settings: Time zone (-12 to +12 hours) > Year >
Month > Day > Month (M) and Day (D)/Day (D) and
Month (M) > 12/24 hour mode > Hours > Minutes
6. Finally, press the SET button to save the settings and
exit setting mode.
11 Time zone setting
The time zone is set as part of the manual time setting. Fur-
ther information can also be found in the chapter “Manual
Time Adjustment”.
1. Press the SET button for approx. 3 seconds to enter the
time setting mode.
2. Possibly press the SET button several times until the
display shows the setting for the time zone (the factory
setting is '00').
3. Press UP or DOWN button to select the desired time de-
viation in hours (-12 to +12 hours).
4. Finally, press SET button for approx. 3 seconds to con-
firm the set time deviation.