Bresser 7004200, Инструкция по эксплуатации

Страница: 13 / 32

13 / 32
12 Receiving measurements automatically
Once batteries are installed, the base station will display the
measurement readings. Readings from the remote sensor
will be displayed within 3 minutes after powering it on.
If no signal will be received, then go ahead with the follow-
ing steps:
1. Press SYNC button for approx. 2 seconds to re-initiate
reception of measurements again.
2. If the device is still not receiving the signal: Press and
hold the DOWN button for approx. 2 seconds to initiate
reception of measurements again.
13 Weather trend
The weather station will calculate a weather trend for the
next 12-24 hours on basis of the measured values.
1 2 3 4 5
1 Sunny 2 Partly cloudy
3 Cloudy 4 Rain
5 Snow
14 Trend arrow indicators
1 2 3
1 Rising 2 Steady
3 Falling