Bresser 7002530, Инструкция по эксплуатации

Страница: 33 / 40

33 / 40
21 Manual measurement display
1. Press MEM button several times to display the saved values one after another.
2. Display order: Current values > MAX (highest values) > MIN (lowest values)
3. When displaying highest or lowest values, press and hold MEM button for approx. 3 seconds to
delete all saved values.
22 HI/LO Alert
HI/LO alert are used to alert you of certain weather conditions. Once activated, the alarm will turn on
and the indicator light starts flashing when a certain criterion is met. The following are areas and type
of alert provided:
Area Type of alert available
Indoor temperature HI AL / LO AL
Humidity (indoor) HI AL / LO AL
Outdoor temperature HI AL / LO AL
Rainfall (hourly) HI AL
Rainfall (daily) HI AL*
HI AL = High alert / LO AL = Low alert
*Daily rainfall since midnight
HI/LO alert setting
1. Press ALERT button until the desired area is selected.
2. Press UP or DOWN button to change the value.
3. Press ALERT button to confirm and continue to the next setting.
Enable/Disable HI/LO Alert
4. Press ALERT button until the desired area is selected.
5. Press ALARM button, to activate the alarm.
6. Press ALERT button to confirm and continue to the next setting.
Note:
7. The unit will automatically exit setting mode in 5 seconds if no button is pressed.
8. When ALERT alarm is on, the area and type of alarm that triggered the alarm will be flashing and
the alarm will sound for 2 minutes.
9. Press SNOOZE/LIGHT button when alarm sounds to interrupt the alarm. The alarm will then start
again after 2 minutes.
Data clearing
10. Press and hold HISTORY button for approx. 3 seconds.
11. Press UP or DOWN button to choose YES or NO.
12. Press HISTORY button to confirm. This will clear out any rainfall data recorded before.