Bresser 7002530, Инструкция по эксплуатации

Страница: 32 / 40

32 / 40
17 Receiving measurements automatically
Once batteries are installed, the base station will display the measurement readings. Readings from
the remote sensor will be displayed within 3 minutes after powering it on.
18 Rainfall
The base station displays how many millimeters / inches of rainfall are accumulated over a time
period, based on the current rainfall rate, that is updated every minute.
Select display mode
Press the RAIN button several times until the desired time range is displayed:
RATE Current rainfall rate in past hour
HOUR Total rainfall rate for current hour
DAY Total rainfall rate within the current day, from midnight
WEEK Total rainfall rate for current week
MONTH Total rainfall rate for current month
YEAR Total rainfall rate for within a year (from first day of the year)
The measurement unit (millimeter or inch) for rainfall is selected via the MM / IN sliding switch.
19 Graphical histogram
1. The Histogram presents an easy view of rainfall change pattern over a a period of time in a graph-
ical manner.
2. The time scale of the graph automatically changes according to the rainfall display modes. Set-
tings order: Rate > Hour > Day > Week > Month > Year
3. By default, the graph is presented in hourly scale.
4. There is no graphical display when yearly rainfall is selected.
To Check history data:
5. Press RAIN button to select rainfall display modes.
6. Settings order: the last 24 hours > the last 31 days > the last 52 weeks > the last 12 months > the
last 5 years
20 Since function for rainfall
1. Press the SINCE button to display the total rainfall from a customized point in time.
2. To delete the current data: Press and hold the SINCE button until the stored value is cleared. The
new value is now equal to day rainfall and the base unit will start again to collect the rainfall data.