Bresser 4Cast PC, Инструкция по эксплуатации

Страница: 52 / 64

52
ACCESSING TEMPERATURE AND HUMIDITY FROM DIFFERENT WIRELESS
OUTDOOR THERMOHYGROMETER
From the Main Unit: Press [ ] or [ ] until the IN icon on the upper right of the display
starts flashing.
VIEWING TEMPERATURE AND HUMIDITY DISPLAY FOR EACH CHANNEL
For Static Display:
In Temperature and Humidity Mode, each press of [ CHANNEL ] rotates display between
different channels.
For Cycling Display:
To enable automatic rotating between different channel displays, press and hold [ CHANNEL ],
until the icon is displayed. Each valid channel will now be alternately displayed for 5s.
ROTATING BETWEEN TEMPERATURE AND DEW POINT DISPLAY
Each press of [ SET ] rotates temperature display between:
• Temperature and Relative Humidity
• Dew Point Temperature and Relative Humidity
SETTING UNITS FOR TEMPERATURE DISPLAY (ºC OR ºF)
Press and hold [ SET ] to convert units between degrees Celsius ºC and degrees Fahrenheit ºF.
ACTIVATING/DEACTIVATING THE TEMPERATURE ALERTS
1. In Temperature and Humidity Mode, each press of [ ALARM/CHART ] rotates channel
temperature display between:
• Current Temperature for corresponding channel
• Upper Temperature Alert (displays OFF if deactivated): icon displayed
• Lower Temperature Alert (displays OFF if deactivated): icon displayed
2. When the above alerts are displayed, Pressing [ ] or [ ] will activate/deactivate the
corresponding alert.
SETTING UP THE TEMPERATURE ALERTS
1. In Temperature and Humidity Mode, press [ ALARM/CHART ] to select alarm which you
wish to configure.
2. Press and hold [ ALARM/CHART ] until channel temperature, and [ ] or [ ] icon starts
flashing in the display.
3. Set Value for Temperature Alert:
Press [ ] or [ ] to adjust value. Press and hold either button for fast advance.
Press [ ALARM/CHART ] to confirm your selection.
4. Upon completion the display will be returned to the temperature alert selection screen.
STATUS
Searching for remote sensor signals
Corresponding remote sensor successfully linked
No signals received for more than 15 minutes
ICON
DISABLING WHEN TEMPERATURE ALARMS ARE ACTIVATED
To Disable Temperature Alarm(s):
Press [ ALARM/CHART ] to disable the alarm (s).
VIEWING THE MAX/MIN CHANNEL TEMPERATURE AND HUMIDITY
Each press of [ MEMORY ] rotates channel temperature and humidity display between:
• Current temperature and humidity at remote sensor
• Minimum temperature and humidity at remote sensor
• Maximum temperature and humidity at remote sensor
RESETTING THE MAX/MIN CHANNEL TEMPERATURE AND HUMIDITY MEMORY
Press and hold [ MEMORY ] to clear memory for all channels.
REMOTE SENSOR STATUS
The wave icon above the current channel display shows the connection status of the
corresponding remote sensor:
ACTIVATING MAIN CONSOLE UNIT TO SEARCH FOR ALL REMOTE SENSOR SIGNALS
The main console unit may be manually activated to search for signals from all remote sensors.
Press and hold [ ] to enforce a search.