Bresser 4Cast PC, Инструкция по эксплуатации

Страница: 11 / 64

11
1.2 GETTING STARTED
• Insert the 4 batteries for remote units, and then insert batteries for the main unit.
• The main unit will automatically scan for the radio-controlled clock signal and the
Meteotime W eather signal. “ SUCHE SIG. “ (means Search Signal) will show in the
INFORMA TION WINDOW .
The time and date signal will be received in a few minutes. Since there is a large amount of
W eather information for all regions and days, the unit needs about 24 hours from the time of
the initial setup to complete the reception of all data
• After the time and date signal is being received successfully, the display shows “SELECT
COUNT RY ” and then “FRANKFURT” as default city in the information window.
To change the Country and the City please see the information below.
• If the unit is able to receive the Meteotime signal successfully, the Meteotime icon is
appeared in the second row of display. Otherwise, the Meteotime will be .
In the event the Meteotime icon change to , that means there are potential sources of
interference on the unit. The sources of interference may come from the electronics equipment
such as TV -set, computers, household machines etc. It may also be due to lots of concrete,
metal parts and electrical equipment in the building. It may also be due to your living area if it
is very far away from the Radio-controlled clock tower.
By the first time you power up this product, the language default setting is in German
Language. In order to change it into another language such as English, Spanish, French, Italian,
Dutch, or Swedish, please follow the setup as below.
When you put in the batteries for the first time, wait until the Main Unit receives
• “ SUCHE SIG. “ (meaning in English is SEARCH SIGNAL); it will display in the
INFORMA TION WINDOW
• After several second, “ LAND EINST” (meaning in English is COUNT RY ) is shown in the
INFORMA TION WINDOW
• Press [ SET ] and “ ZONE +00 H “ is shown in the INFORMATION WINDOW
• Now press [ SET ] again and the “ LANGUAGE “ will be shown in the INFORMATION
WINDOW , then press [ ] or [ ] to select your desired language. There are total seven
languages to select, namely German, English, Spanish, French, Italian, Dutch, Swedish
• Press [ SET ] two times to exit the setup.
If you skip the above-mentioned step, the INFORMATION WINDOW will show the default
city FRANKFURT.M. Y ou can change to your desired city in the following steps.
• Press and Hold [ SET ] for 3 second, is shown in the Information Window,
then press [ ] or [ ] key to select the country. For example, you have selected The
country name such as means Germany
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to go to your selected city, lets said ‘Frankfurt am Main’, and
the will show in the information window.
• At least press [ SET ] to confirm your selected city.
means it successfully receives today’s
weather information. Otherwise, it will be
means it is able to
receive the Meteotime
weather signal.
Otherwise, it will be
means it
successfully
receives weather
information of
two-day-after.
Otherwise, it will
be
means it
successfully
receives weather
information of
one-day-after.
Otherwise, it will
be
means it
successfully
receives tomorrow
weather information.
Otherwise, it will
be