Breitling BENTLEY SUPERSPORTS B55, Руководство пользователя

Страница: 23 / 166

41 40
f) Introducing the distance for the tachymeter
To enable the tachymeter to calculate the speed correctly, the distance corresponding
to the time recorded must be introduced. This setting is done as follows:
• With
CHR ADD
mode stopped without displaying the speed, pull the crown into
position 2; the upper screen will display
DIST
, followed by 3 digits (for the
distance), followed by one to three letters (for the distance unit); the distance
unit flashes.
• Select the distance unit by turning the crown – see figure 2:
• Confirm by pressing P2; the first digit of the distance value will flash.
• Select the units, the tens and then the hundreds for the distance by turning the
crown, confirming each time by pressing P2.
• Press the crown back to neutral position 1.
g) Rereading intermediate times
Rereading of intermediate times is achieved by successive pressing of P2 with
the display of
SPLIT01
to
SPLIT
xx intermediate times memorized.
h) Recovery of times
If the watch is connected to a smartphone, using the application on the latter
it is possible to recover information on times recorded.
e) Converting units of speed
When the speed is displayed, the unit can be changed, thus converting it, as follows:
• When the speed appears, pull the crown to position 2 (
CONVERT
)
• Change the units by turning the crown (see figure 2)
• Press the crown into neutral position 1. The speed is automatically expressed in
the new unit.
Distance unit Corresponding speed unit
M
(meter)
M/S
(meters per second)
KM
(kilometer)
KM/H
(kilometers per hour)
FT
(foot)
FT/S
(feet per second)
yD
(yard)
yD/S
(yards per second)
MI
(mile)
MPH
(miles per hour)
NMI
(nautical mile)
KNOT
(knots)
Figure 2