Breitling BENTLEY SUPERSPORTS B55, Руководство пользователя

Страница: 16 / 166

27 26
N.B.: When in setting mode (
SETTIME
), pressing P1 will restart the seconds counter
from 0. The seconds counter only stops when the seconds are manually modified.
In this case, it restarts when exiting setting (putting the crown back to neutral
position 1). The seconds are automatically synchronized on the
UTC
and
TIME 2
timezones.
In
TIME
mode, pressing P1 makes it possible to go into
DATE
mode and display the
date according to different formats (see chapter 8). A long press on P1 puts the
display directly back to
TIME
.
In
TIME
mode, a long press on P2 allows to choose between either the 12-hour (
AM
or
PM
indicator) or the 24-hour display. The change also happens automatically for
the
TIME 2
zone and the seven alarms.
7. CONFIGURING THE WATCH (
SETTING
)
In the
SETTING
mode, the following adjustments can be made (all these settings are
memorized by the watch and therefore available even in the event of the battery
being completely flat):
1.
SyNCHRO
: synchronization of the analog display with the digital display.
2.
TILT
: lighting goes on automatically (and possibly the LCD) depending on the
position of the wrist (positioned around 30° to horizontal), but for a maximum
of 30 seconds, unless in the setting mode (
SETTING
).
• Press the crown into neutral position 1.
The watch has a perpetual calendar until 2099.
6. SETTING THE MAIN ZONE (
TIME
)
a) Setting (
SETTIME
)
• Select the
TIME
or
DATE
function.
• Pull the crown into position 2: if the hour was displayed,
SETTIME
appears on
the upper screen and the setting process (in a loop) starts by the time setting.
If the date was displayed,
SETDATE
appears on the upper screen and the setting
process will start with adjusting the date. In the second case, press on P2 until
the hours begin to flash (
UTC +/-
xx).
• By turning the crown, adjust the time in relation to the difference with UTC,
from
UTC-12
to
UTC+14
.
• Confirm by pressing P2; the minutes flash (display
MIN +00
) on the upper screen.
• If necessary, adjust the minutes in 15-minute increments and confirm by pressing
P2; the seconds flash (
SECOND
appears on the upper screen).
• Adjust the seconds (which will automatically be adjusted in the
TIME 2
and
UTC
)
and confirm by pressing P2.
• Press the crown back to neutral position 1.