Rev 06131
11
Brehon Agrisystems Inc. is not responsible or liable for indirect, special, or consequential damages arising out of or in
connection with the use or performance of the product or other damage with respect to any economic loss, loss of
property, loss of revenue or profit, or costs of removal, installation, or reinstallation.
ENDGATE DRIVER:
The Endgate Driver will only operate while its transmitter button/ manual switch control button is
depressed. Release the button immediately when the endgate is fully opened or closed. Do not
operate in a stalled condition. This could result in reduced service life or destruction of the Endgate
Driver.
The Receiver power switch should be turned Off when not in use to prevent undesired operation.
HOIST DRIVER:
The
G. Force
Hoist Driver shaft arm is designed to move each way from center and stay in that
position until its transmitter button/ manual switch control button is released or, as a safety default,
until input signal is otherwise lost. It will then return to the center Off (neutral) position. This
results in a slight delay from the time the button is released until the hoist actually stops.
The Stop
button on the transmitter is not used
- the actuator automatically returns to the center (neutral)
position.
The Receiver power switch should be turned Off when not in use to prevent undesired operation.
Think Safety:
Do Not install or operate where
damage to property or persons may occur.
