9
8
16.02.2022
EN
EN
U S E R M A N U A L
3. USE GUIDELINES
The product is intended for home use only!The device is
intended for permanent installation above a gas or electric
stovetop to remove or neutralize cooking fumes.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
1.
vents
2.
top grille
3.
bottom grille
4.
lighting
5.
filter
6.
filter clamp
7.
the main module of the hood
8.
control panel
a. fan ON/OFF switch
b. low speed button
c. medium speed button
d. high speed button
e. light ON/OFF switch
9.
power cord (not shown in the illustration)
10. air outlet (not shown in the illustration)
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
REMEMBER
!
When using the device, protect
children and other bystanders.
s)
Before installing the device, make sure that the
surface of the wall on which you intend to fix it is
stable and provides sufficient load-bearing capacity.
t)
DO NOT check the condition of the device filters
when the device is in the operating mode.
u)
It is recommended to supervise the dishes being
cooked as hot fat is a fire hazard.
a person responsible for their safety or they have
received instruction on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
If suction is to be connected to the device, check all
connections and make sure they are tight. Using a
dedusting system may reduce the risks associated
with dust.
f)
Remove all adjusting tools or spanners before
turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
g)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
c)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
h)
Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
i)
Do not move, adjust or rotate the device in the
course of work.
j)
Clean the device regularly to prevent stubborn grime
from accumulating.
k)
Do not cover the air intake and outlet.
l)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
m) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n)
Keep the device away from sources of fire and heat.
o)
Do not connect the hood extraction conduit to
combustion gas exhaust chimneys or flues.
p)
If the hood is used in a room where there are fuel-
burning devices, it is necessary to ensure adequate
ventilation.
q)
Do not leave the device in operation above a gas
stove with an exposed flame.
r)
Before installing the device, make sure that the vents
in the room are not blocked.
ATTENTION!
Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
TECHNICAL DATA
The terms "device" or "product" are used in the warnings
and instructions to refer to "device name". Do not use in
very humid environments or in the direct vicinity of water
tanks. Prevent the device from getting wet. Risk of electric
shock! Do not cover air inlets / outlets! Do not put your
hands or other items inside the device while it is in use!
2.1. ELECTRICAL SAFETY
a)
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
d)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
e)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer‘s service centre.
f)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
2.2. SAFETY IN THE WORKPLACE
a)
If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
b)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
c)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
d)
In case of fire, use a powder or carbon dioxide
(CO
2
) fire extinguisher (one intended for use on live
electrical devices) to put it out.
e)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
f)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
g)
Keep packaging elements and small assembly parts
in a place not available to children.
The product satisfies the relevant safety standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER! Applicable
to the given situation (general warning sign).
ATTENTION! Electric shock warning!
ATTENTION! Rotating parts, entanglement hazard!
Only use indoors.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
PLEASE NOTE
!
Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
ATTENTION!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
Parameter description
Parameter value
Product name
Cooker Hood
Model
BCCH-115D-90E
Rated voltage [V~] /
Frequency [Hz]
230 / 50
Rated power [W]
115
Fan motor power [W]
65
Lighting power [W]
2 x 25
Sound power level [L
WA
]
64
Air flow [m
3
/h]
328.7
Number of fan speeds
3
Outlet diameter [mm]
150
Filter dimensions [mm]
365×286.2×9
Dimensions [mm]
900×470×(535–855)
Weight [kg]
8.5
a
b
c
e
d
1
2
3
8
7
4
5
6
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
