Breckwell SW180, Руководство владельца по эксплуатации и инструкции

Страница: 8 / 28

8
4.5 SPECIAL MOBILE HOME REQUIREMENTS

WARNING! - Do not install in a sleeping room

CAUTION! - The structural integrity of the mobile home fl oor, wall, and ceiling/roof must be maintained
.
In addition to the previously detailed installation requirements, mobile home installations must meet the following requirements:
• The heater must be permanently attached to the fl oor.
1. There are two holes in the pedestal base, use 3/8” bolts through the fl oor.
2. To attach the leg model use two 3/8-16 UNC bolts through the fl oor.
• The heater must be electrically grounded to the steel chassis of the mobile home with 8 GA copper wire using a serrated or star
washer to penetrate paint or protective coating to ensure grounding.
• When moving your mobile home, all exterior venting must be removed while the mobile home is being relocated. After relocation,
all venting must be reinstalled and securely fastened.
• Outside Air is mandatory for mobile home installation. See your dealer for purchasing.
• Check with your local building of fi cials as other codes may apply.
MOBILE HOME ATTACHEMENT