Breckwell SW180, Руководство владельца по эксплуатации и инструкции

Страница: 3 / 28

3
2.1 UNPACK AND INSPECT
Remove the packing from the appliance and inspect for any damage. Ensure that the bricks are positioned correctly and not broken
(see illustration for proper brick arrangement). Make sure that the baf fl e board, above the air tubes, is in place and undamaged. DO
NOT remove the baf fl e board.
2.2 TOOLS AND MATERIALS NEEDED FOR INSTALLATION
You must choose one of the three offered kits:
A) Pedestal Kit (SA180P)
B) Leg Kit (SA180L)
C) Fireplace Insert (SA180i)
Refer to the instructions found inside each kit for proper assembly.
A 7/16” socket wrench
A 5/16” socket (Best if using a power drill and a socket bit)
A pair of pliers or channel-locks
A power drill with an 1/8” drill bit to install sheet metal screws into connector pipe.
Sheet metal screws
A non-combustible
fl oor protector as speci fi ed in this manual
All chimney and chimney connector components required for your particular venting installation.
2.0 PRE-ASSEMBLY
BRICK CONFIGURATION