background image

 14

GP100 and GP250 User Instructions

3 Troubleshooting

Symptom

Recommended Action

Not weighing correctly 
or
inaccurate weight

The scale is under zero. Press the “ON/OFF(ZERO)” key. 
or
Damage to the scale has occurred, calibrate the scale, see page 6 for 
instructions. 
or
Press the 

[IUNITS]

 key, the unit is displaying the incorrect unit of measure, lb 

or kg.

Weight fluctuates

Press 

[ZERO]

 key, to zero the scale before placing an item on the scale.

or
Ensure scale is placed in a stable, level environment free from vibration.
or
Turn the scale Off, then back on. 

“Lo” is displayed

Replace the battery.

“Over” is displayed

The weight placed on the scale is over the scales capacity. Remove the weight 
from the scale. 
or
The weight placed on the scale plus the tare weight is over the scales 
maximum capacity. Remove the weight from the scale.

“ErrL” is displayed

The scale is under zero. Press the 

[ZERO]

 key. 

or
Damage to the scale has occurred, Calibrate the scale, see 

page 10

 for 

instructions.

After pressing the 

[HOLD]

 key and placing a 

weight on the scale, the weight will not hold on 
the display. The “ . ” continues to flash

Remove weight from scale and place the Weight in the center of the scale.
or
The scale is not in a stable environment that allows the weight hold feature to 
work. Remove the item and place it back onto the scale.
or
Not enough weight is applied for the weight hold to work, minimum weight 
required is 1 pound.

“ErrE” is displayed

Software error, turn the scale off then on again

“8888” is displayed

Software error, turn the scale off then on again. 
or

[ZERO/ON-OFF]

 key is stuck. Gently free 

[ZERO/ON-OFF]

 key.

Unit will not stay on

Auto power off is activated, See 

page 9

 for configuration.

Backlit display does not work

Display is broken.

I lost my power supply and battery cover

Contact the factory at 1-800-637-0529 for replacement parts.

Incorrect hold weight

Scale was not able to stabilize and determine a hold weight, repeat hold.
or
Hold key is stuck, gently free hold button.
or
Item was not placed on the scale quick enough.

Содержание GP100-USB

















Отзывы: