AWT35-501815 Issue AB C3236_u_en_501815.docx
Page 12
4. Menus
There are three menus that allow to configure, enable or execute specific functions or options.
page
•
User Menu
UF
– 1 ~ 11
12
•
Supervisor Menu
LF 1 ~ 8
13
•
Quick Calibration Menu
ECF
– 1 ~ 3
15
4.1. User Menu
In the User Menu there are various submenus available to configure specific sections of the scale
operating modes, including a diagnostic feature.
4.1.1. User Menu Levels [UF]
Navigate the menus and increase a numeric value by pressing
FN
(
▲) key. Use
ON/ZERO/TARE
(
↵
)
key
to confirm and/or move to the next option or numeric value position. Press
UNITS
(
ESC
) key to exit
the option or the menu.
4.1.2. User Functions Descriptions [UF]
There are 11 Setup Functions.
UF-1
Diagnostic:
use this menu to check or verify the performance of the indicator. The
diagnostic tests are:
Internal A/D Value
and
Battery Voltage
.
UF-2
Checkweighing
: the acceptable weight is any weight which falls between the upper and
lower limits. Enter this option to set the items relating to Checkweighing:
•
LOW
/
HIGH
limits. Valid beeper modes:
o 000
; o
001; o 002
.
See chapter 3.3. on page 10.
