AWT35-501815 Issue AB C3236_u_en_501815.docx
Page 13
UF-3
Auto Power-Off
: use this to set the length of time before the scale automatically turns
off if not being used. Values can be set between 01 and 99 minutes.
Factory default: AoFF 10
(
10min
)
.
Auto Power-OFF disabled when
AoFF 00
UF-4
Stand by
: a battery power saving function to turn off the display power but not turn off
the scale. Ideal for weight processes where the scale could say inactive for long periods
of time and where the Zero point or current weight cannot be lost. Any weight change or
key press will automatically turn the display back on. Values between 01 and 99 seconds
are valid.
UF-5
ADC Update Rate
: use this to select the sampling frequency: 15 (1), 30 (2) or 7.5Hz (3)
See Supervisor Menu.
UF-6
Automatic Zero Tracking
: use this to define a ± 0 /5 divisions range around zero.
See Supervisor Menu.
UF-7
Gravitational value
: use this item to key in a G constant value: 9.78031 < G < 9.83217
See Supervisor Menu.
4.2. Supervisor Menu
In the Supervisor Menu there are various submenus available to configure system parameters,
specific sections of the operating modes and the calibration feature (see also chapter 6. Calibration).
4.2.1. Service Menu Levels [LF]
Navigate the menus and increase a numeric value by pressing
FN
(▲) key. Use
ON/ZERO/TARE
(
↵
)
key
to confirm and/or move to the next option or numeric value position. Press
UNITS
(
ESC
) key to exit
the option or the menu.
