introduction
Thank you for purchasing our Digital Kitchen Scale, and welcome to the
Ivation™ family. This user manual is meant to offer you a brief walkthrough
of the device’s features and usage protocols. We hope you find this
manual helpful. For additional information and technical support, please
feel encouraged to contact our help team at [email protected].
technical specifications
Weight Capacity:
5kg/11lbs.
Weighing Units:
ml, g, oz
Graduation:
1g
Dimensions:
7.75” x 5.75” x 1.75”
Power Source:
2 x AAA Battery
Alerts:
Low Battery, Weight Overload
Operating
Temperature: 50°F to 104°F
Operation Humidity:
Up to 90% RH
Storage Temperature:
14°F to 122°F
Understand Indications:
- When display reads “Lo” and device powers off, replace batteries.
- Display will read “Err” when a weight greater than 5kg is applied.
Remove heavy object to avoid destroying device.
- If display reads “Unst”, check that the object being weighed is stable
and properly placed on weighing platform.
Changing the Batteries:
- Locate Battery Compartment Door (5) on back of unit.
- Depress release tab and remove door.
- Use fingernail and/or flat screwdriver to gently remove spent batteries.
- Insert fresh batteries in correct orientation and close door until it clicks
parts & controls
1. Weighing Surface
2. Digital Display
3. Unit Button
4. Power/Tare Button
5. Battery Compartment Door
6. Rubberized Stability Feet
operation & usage
Basics:
- Place scale on flat, stable surface.
- Press Power/Tare Button (4) and allow scale to enter weighing mode.
- Select preferred Weight Unit by repeatedly pressing Unit Button (3)
until correct unit is displayed.
- Place object on center of weighing platform. Wait until numbers stabilize
to record proper weight reading.
- To turn scale off, remove all objects from weighing platform and wait for
reading to go down to “0”. Then press Power/Tare Button (4).
Tare Function:
- When using a container, plate, etc. to weigh another object, place the
empty container/plate on scale first. Display will show weight of empty
container/plate.
- Press Power/Tare Button (4) to bring the weight reading to “0”, so that
you may get an accurate reading of the object(s) you will place within the
container/plate.
- Proceed to place the object(s) you are weighing into the container/plate.
- The weight reading will now be accurate.
- To reset tare function, remove all objects from weighing platform and
press the Power/Tare Button (4). Reading will return to “0”.
Note: Whenever the display reads “0”, pressing the Power/Tare Button (4)
will turn the scale off. Be mindful of this when the tare function is on.
1
important safety instructions
All information presented in this section is provided to instruct you in the
correct and safe operation of this device. Please read all instructions
carefully before using, and save this manual for future reference.
Warning:
- Use only as kitchen scale; do not step on
- Do not exceed maximum weight rating
- Do not drop and do not submerge in water
- Remove batteries when not in use for prolonged period of time
- Avoid electromagnetic interference
- Do not keep any objects on scale when not in use
feature highlights
- Sturdy, Lightweight Plastic Housing
- Easy-Press Plastic-Covered Buttons
- Large, Clear Digital Display
- 5.5” x 5.5” Weighing Surface
- Accurate Tare Function
box contents
1 x Digital Kitchen Scale
2 x AAA Batteries
1 x User Manual
2
4
6 (Bottom)
3
5 (Bottom
Center)
Distributed by
C & A Marketing
2 Bergen Turnpike
Ridgefield Park, NJ 07660
[email protected]
Made in China
ivation is a trademark of
C&A IP Holdings, LLC
©2014 All right reserved
kitchen scale
with tare function
user manual