Breadman TR-777SPR, Инструкция по эксплуатации

Страница: 27 / 54

“H:I”
“HH:HH”
“LL:LL”
“FF:FF”
“88:88”
displays when
you press
START Button
TROUBLE SHOOTING
(continued)
Symptom Possible Solutions
“_ _ H” displays
when you press
START Button
The Breadman ® is too hot (over 105°F/40°C) to begin
preparing another loaf. Remove the Bread Pan with your
ingredients, and wait until the Breadman
® cools down —
about 20 minutes — before preparing a new loaf.
Unplug the Breadman ® and contact Salton, Inc.
Service Department at 1-800-233-9054.
“_ _ L” displays
when you press
START Button
The Breadman ® is too cold (lower than 29°F/-5°C). Unplug
the machine and allow it to heat up to room temperature,
then try again.
“_ HI” displays
when you press
START Button
The Breadman ® is too hot (over 300 °F/-150°C).
25 4
USING THE BREADMAN ®
With your new Breadman ® Automatic Bread Baker:
• You can use pre-packaged bread mixes. Recipe instructions
should be on each package.
NOTE: Ingredients should be added in order suggested
on page 13 of this manual.
• You can bake a loaf of bread from scratch. See the Recipe
and Menu Planner included with your Breadman ® for lots of
tasty options.
• There are also many Bread Machine cookbooks available at
bookstores nationwide.
• You can make dough for rolls or shaped loaves you’ll bake
in your wall oven. Use the Breadman’s ® Dough Cycle to do
the mixing and kneading for you, then shape and bake the
bread yourself.
• You can make non-yeast Batter Breads™ , Cakes & Jam,
Pizza Dough too!
• To insert the Bread Pan in the Bread Baker, seat it over the
motor drive coupling and press down until it snaps into place.
Remember to insert the Kneading Paddle first, then add all
your ingredients BEFORE inserting the Bread Pan into the
Oven of your Breadman
®
.
• To remove the Bread Pan from the Bread Machine, hold
the Handle with a mitt and lift gently.
When you remove the Bread Pan after baking, BE SURE
TO WEAR OVEN MITTS to prevent burning.
After
you remove the loaf by turning the Bread Pan upside down
and shaking gently, check to see that the Kneading Paddle
is removed from the loaf. If it is stuck in your bread, use a
non-metal utensil to gently remove it, taking care not to
scratch the Kneading Paddle.
• Use oven mitts when working with bread or any part of the
Breadman ® which is hot from baking.
• Wipe off crumbs and clean the Breadman
®
, as needed,
after baking.
• Unplug the Breadman ® when you are not using it.
Inserting and
Removing the
Bread Pan
Operating Tips