BRAYER BR4882, Инструкция по эксплуатации

Страница: 15 / 76

15 EN
program, touch the button (10) « » on the control
panel (3) or press the button (26) « » on the remote
control (22).
4. The appliance will automatically switch to the
further setting mode of the program «UP», while the
display (2) will show the character «d2» (Tuesday),
and the flashing icon (15) « ». Set the start time
of the program and the end time of the program «d2»
(Tuesday) as described in points 2 and 3.
5. Set the individual operation of the customization
program «UP» for the following days of the week
«d3, d4, d5, d6, d7» (Wednesday, Thursday, Friday,
Saturday, Sunday), similar to the previous points of the
section.
6. After setting the start time and end time of the
program «d3, d4, d5, d6, d7» (Wednesday, Thursday,
Friday, Saturday, Sunday), do not forget to touch the
button (10) « » once on the control panel (3) or press
the button (26) « » on the remote control (22) to
confirm the time settings, while the icon (15) « » will
stop flashing.
Notes:
- if within 2 minutes no actions are performed to set up
the program «UP» , the appliance will go into standby
mode.
- during operation, you can reduce or increase the room
heating power by touching the button (8) « » on the
control panel (3) or pressing the button (24) « » on
the remote control (22) , while the display (2) will show
the icons (15) « » (maximum power 1500 W) or (16)
« » (low power 750 W) are displayed.
- regardless of the set periods of the customization
program «UP», the display (2) will show the icon
of Frost Protection function (19) «
», if the room
temperature drops below +5ºC, the appliance will turn
on and keep the temperature in room at +5ºC.
7. To check the settings for the operation of the
customization program «UP», touch and hold the button
(11) «ПРОГ» for 3 seconds on the control panel (3) or
press and hold the button (27) «ПРОГ» for 3 seconds
on the remote control ( 22). By repeatedly touching
the button (11) «ПРОГ» or pressing the button (27) «
ПРОГ» check the correctness of the start and end time
of the program «UP», while the display (2) will show
the characters «d1, d2, d3, d4, d5, d6, d7» (Monday,
Tuesday, Wednesday, Thursday, Friday, Saturday,
Sunday) and the set start and end times for the
customization program «UP».