BRAYER BR4882, Инструкция по эксплуатации

Страница: 16 / 76

16 EN
OPEN WINDOW DETECTION FUNCTION
• When the appliance is turned on, touch the button
(9) « » once on the control panel (3) or press the
button (25) « » on the remote control (22), while
the display (2) will show a flashing icon (20) « ».
To disable the open window detection function, touch
the button (9) «
» on the control panel (3) again
or press the button (25) « » on the remote control
(22), while the icon (25) « » will go out on the
display (2) .
• When the open window detection function is enabled,
the appliance operates in the room heating mode, but
if the room temperature drops by 5°C in 10 minutes,
the appliance will perceive this phenomenon as the
possibility of an accidental opening of the window.
Within the next 30 minutes, if the room temperature
does not rise, the room heating will stop and the
appliance will turn off. The icon (25) « » on the
display (2) will stop flashing and remain lit, reminding
the user to close the window.
• After closing the window, touch the button (9) « »
on the control panel (3) or press the button (25)
« » on the remote control (22) to restore the open
window detection function, while the icon (25) « »
on the display (2) will start flashing again.
CHILD SAFETY LOCK FUNCTION
• When the appliance is turned on, simultaneously
touch the buttons (13) « » or « » on the control
panel (3) or simultaneously press the buttons (29)
« » or « » on the remote control (22) and hold
them for 3 seconds, while icon «[ ]» will be displayed
on the display ( 2), all control buttons will no longer
be active.
• To disable the child safety lock function,
simultaneously touch the buttons (13) « » and
« » on the control panel (3) or simultaneously
press the buttons (29) « » and « » on the
remote control (22) for 3 seconds.
SWITCHING OFF THE CONVECTION FAN
HEATER
• To finish operation, touch the button (7) « » once
or press the button (23) « » once on the remote
control (22), and the appliance will turn off.
• To turn off the power, turn the switch (5) to the
«OFF» position and unplug the power cord from the
electrical outlet.
RESTORING THE FACTORY SETTINGS
• To restore factory settings, turn off the power by
setting the switch (5) to the «OFF» position, touch and
hold the button (13) « », then connect the power by