BRAYER BR4882, Инструкция по эксплуатации

Страница: 11 / 76

11 EN
to set the time «minutes». Touch the button (10) « »
on the control panel (3) once or press the button (26) «
» on the remote control (22) to confirm the setting of
the current time «minutes».
4. To check whether the current day and current time
settings are correct, touch the button (10) «
» on
the control panel (3) once in standby mode or press
the button (26) «
» on the remote control (22), while
the display (2) will show the settings «Day» - «Hour»
- «Minute», and the data will be displayed in turn for
1 second each, then the display (2) will switch to the
temperature display.
Example: - if the current day is set as «Wednesday»
and the current time is «12:45», then the display (2) will
show «d3 - 12 - 45»in turn
Note: - when the appliance is turned on for the first
time, the icon (17) « » on the display (2) will flash,
reminding the user to set the current day and current
time, please set the current day and current time
settings and complete them before any other operation.
POWER SETTING
• When the appliance is turned on, the display (2)
will show the icon (15) « » indicating that the
appliance is turned on at full power of 1500 W.
• Touch the button (8) « » on the control panel (3)
or press the button (24) « » on the remote control
(22) to switch the power mode, while the display
(2) will show the icon (16) « » indicating that the
appliance is turned on at a low power of 750 W.
Note: - when the appliance is turned on for the first
time, a small amount of smoke or foreign smell may
appear; this is normal and is not covered by the
warranty.
ROOM HEATING TEMPERATURE SETTING
• After setting the desired power of 750 W or 1500
W, touch the buttons (13) « » or « » on the
control panel (3) or press the buttons (29) «
» or « » on the remote control (22) to set the
room heating temperature, the temperature will be
displayed on display (2) with numeric characters (21)
and the icon (14) « ». Temperature setting range
from 5 to 35
0
С. The set temperature will get retained
after 5 seconds if no further temperature changes
are made.
Notes:
- default temperature is set at 24
0
С;
- when the room temperature reaches the set
value, the appliance will turn off; when the room