BRAYER BR1602, Инструкция по эксплуатации

Страница: 11 / 52

11 EN
•
Install the food tray (6).
•
Put the natural casing in a bowl with warm water for
10-15 minutes.
•
Pull softened casing on the attachment (12) and
make a knot on the tip.
•
Put the minced meat on the food tray (6).
•
Insert the power plug into the mains socket.
•
Switch the meat grinder on by pressing the button
«ON».
•
Use the pusher (5) to push down the minced meat;
as the casing is filled, slide it off the attachment (12),
and wet it as the casing dries.
•
After the operation is finished, switch the meat
grinder off by setting the operation mode switch
(1) to the position «OFF», unplug the unit and then
disassemble it.
•
Unscrew the nut (11), remove the attachments (12)
and (13) and remove the screw (8).
•
To remove the meat grinder head (7), press the lock
button (3), turn the meat grinder head (7) clockwise
and remove it.
VEGETABLE SLICER
ATTENTION! Continuous operation time when
using the vegetable attachment should not
exceed 1 minute and the amount of processed
vegetables should not exceed 0,5 kg.
•
Insert the vegetable slicer (18) into the installation
place (4), press on the lock button (3) and turn the
vegetable slicer (18) counterclockwise until it is fixed
(pic. 4).
•
Insert one of the attachments (14 or 15) into the
vegetable slicer (18).
•
Fix the attachment (14 or 15), to do this, install the
holder (16) and turn it counterclockwise « ».
•
Insert the power plug into the mains socket.
•
Switch the meat grinder on by pressing the button
«ON».
•
During operation, use only the pusher (17) supplied
with the unit . Do not make excessive efforts to push
the vegetables. Do not push the vegetables with your
hands or any other objects.
•
After the operation is finished, switch the meat
grinder off by setting the operation mode switch (1)
to the position «OFF», unplug the unit and then start
removing the vegetable slicer (18).
•
To remove the vegetable slicer (18), press the lock
button (3), turn the vegetable slicer (18) clockwise
and remove it.
•
Turn the attachment holder (16) clockwise « » and
remove it.