BRAYER BR1101, Инструкция по эксплуатации

Страница: 7 / 35

12 13 En En
DRIP TRAY (1)
• A red pop-up indicator (3) in the grid (2) will show
when the tray (1) is full.
•
Remove the grid (2) from the tray (1), remove the
tray (1) and pour out water, install the tray back to its
place, put the grid (2) on the tray (1).
•
If necessary, wash the tray (1) and the grid (2) with
water and soft detergent, rinse and dry.
STORAGE
• Before taking the coffee maker away for long storage,
unplug it and let the unit cool down.
• Clean the coffee maker.
• Pack the coffee maker in the original package.
• Use and store the coffee maker at the temperature
above 0 °C.
• Keep the coffee maker in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
1. Coffee maker — 1 pc.
2.
Measuring spoon — 1 pc.
3.
Manual — 1 pc.
The manufacturing date is specified in the serial
number.
In case of any malfunctions promptly apply to the
authorized service center.
The manufacturer reserves the right to change the
design, structure and specifications not affecting
general principles of the unit operation, without prior
notice.
The unit operating life is 3 years
TROUBLESHOOTING
Problem Cause Solution
Water leaks from
the bottom of the
coffee maker
The tray is full of
water.
Please, clean the tray.
The coffee
maker is
damaged.
Please, apply to the service
center for repairing the
coffee maker.
Water leaks from
the filter holder.
There is ground
coffee on the
filter.
Clean the filter edges from
ground coffee.
Ready coffee
has unpleasant
taste.
The coffee
maker was not
washed after
descaling.
Clean the coffee maker
from mineral scale and
wash it from the remaining
descaling agent.
Ground coffee
was stored in a
humid place for
a long time. Please, use fresh ground
coffee. Keep unused
ground coffee in a hermetic
package in a dry cool place.
The unit cannot
be switched on
No voltage in the
mains socket.
The power plug
is not completely
inserted into the
socket.
Make sure that the mains
socket is properly operating.
Check whether the power
plug is completely inserted
into the socket.
Steam doesn’t
froth milk
The ready
indicator doesn’t
glow white.
You can use steam to froth
milk only after the indicator
starts glowing white.
The used cup
does not suit
for proper milk
frothing.
Use a tall and narrow cup.
You used
skimmed milk.
Use only whole milk with fat
content 4-6%.
TECHNICAL SPECIFICATIONS
• Power supply 220-240 V, ~ 50-60 Hz
• Rated input power: 1200 W
• Water tank capacity: 1,5 l
RECYCLING
For environment protection apply to the
specialized centers for further recycling after
the service life expiration of the unit.
The waste generated during the disposal of
the unit is subject to mandatory collection
and consequent disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this
product.
https://tm.by
Интернет
-
магазин
TM.by