Brave VH0934, Руководство по использованию и уходу для владельца/оператора

Страница: 27 / 48

d . Move the log under the splitting
wedge, keeping your hands on the
sides of the log near the middle of the
block. Center the log making sure that
the sawed end is sitting on the large
plate (base plate).
Make sure you stand clear from the
engine’s exhaust. Hot exhaust is
intense and can cause serious injury.
Do not place your hands on top
of the log when loading the log
splitter. This is a very UNSAFE
method and could result in injury to your
hands.
If you find you must hold the log
until the splitting wedge touches
it and holds it in place, be very
careful not to put your hand on top of the
log. If you must, hold the log in the middle
of the block. Remove your hand immedi-
ately when the splitting wedge engages the
log. Never use your hip or any extension
device to operate the valve control handle.
e . Only using your hand, push the control
lever down (towards the log). If the log
moves, before it is contacted by the
splitting wedge, release the control
lever and then reposition the log.
Operate the log splitter only when
standing in the
safe operating area ,
as shown in the picture.
CAUTION
CAUTION
CAUTION
815-672-8861
25
Brave Products, Inc.