Brauniger AV Pilot II, Руководство по эксплуатации

Страница: 22 / 50

Operating Instructions AV Pilot II 20
Vario option mode
The integration time of the digital vario can be
altered at the first level of option mode. The
values are in 5-second steps between 5 and 35
seconds and appear flashing in the digital vario
display. At setting 1, the digital vario is displayed
without averaging and then runs parallel to the
bar display. The values can be altered with the
and the keys.
The audio response point can be adjusted at the
second level. The audio response point can be
adjusted from +2 cm/s to +40 cm/s. The current
response point appears in the bar display and
represents one tenth of the value displayed. E.g.:
a display of 2 m/s corresponds to an audio res-
ponse point of 20 cm/s.
The digital vario unit can be selected at the third
level: m/s or feet/min x 100. The current setting
flashes in the digital vario display. You can switch
between the two units with the key.
Descent tone/Descent alarm
The descent tone is a continuous tone dependent on descent which sounds as soon as des-
cent is greater than the response point. The descent tone can be set or switched off with the
key. When the descent tone is active, the SINK indicator is displayed. When the descent
tone is first switched on, a mark appears in the bar display indicating the response point set.
Descent alarm setting mode
The response point of the descent alarm is set in
the bar display using the keys. The response point
can be set over the entire range of the display and
also remains stored in memory after the instrument
has been switched off.
CLEAR ALT 2
START - STOP
RESET
START - STOP
RESET
SET-MODE
Basic attenuation
Mode OPTION
Integration time
1…35
Audio response
level
Unit
m/s ft/minx100
VARIO
VARIO
VARIO 4 Sec.
OPTION
OPTION
À
Á
Â
SET-MODE
Set Descent alarm
SINK
SINK
SINK 4 Sec.
PRINT
English