BraunAbility Vista 2, Руководство пользователя

Страница: 6 / 25

Page 7 Page 6
Specifications
The lift must be installed, operated, and maintained as detailed in applicable manuals.
Any use of equipment other than instructed in this manual is prohibited.
The 363kg (800 lb.) lift capacity Vista-2 series lifts have completed 15,600 cycles with a 363kg load and
a static load test with a 1090kg (2400 lb.) load.
The 272kg (600 lb.) lift capacity Vista-2 series lifts have completed 15,600 cycles with a 272kg load and
a static load test with a 816kg (1800 lb.) load.
VL998IB3448RP-2
VL998IB3452RP-2
VL998IB3463RP-2
VL996IB3042-2 Series AA
VL996IB3042-2 Series AB 12 VDC
12 VDC
12 VDC
12 VDC
12 VDC 363kg (800lbs)
363kg (800lbs)
363kg (800lbs)
272kg (600lbs)
363kg (800lbs)
170kg (374lbs)
173kg (381lbs)
181kg (398lbs)
144kg (319lbs)
147kg (324lbs)
Operating Temperature
This equipment will operate in its intended ambient at a minimum between -30ºC and 65ºC.
Relative Humidity
This equipment will operate correctly within an environment at 50% RH, at 40ºC.
Altitude
This equipment will operate correctly up to 1000m above mean sea level.
Sound Pressure Level
The emission sound pressure level at the operator’s position is expected not to exceed 70 db(A).
Transportation and Storage
This equipment will withstand, or has been protected against, transportation and storage temperatures
of -25ºC to +55ºC, and for short periods of up to +70ºC.
The lift has been packaged to prevent damage from the effects of normal humidity, vibration, and shock.
Maximum
Load Capacity
Power
Requirement
Lift
Weight
Lift
Model
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
Do not raise front wheelchair wheels (pull wheelie) when loading, boarding, or riding on
the platform.
Open lift door(s) fully and secure before operating lift.
Position and secure (buckle, engage, fasten, etc.) the wheelchair-equipped occupant
seat belt (torso restraint) before loading onto the wheelchair lift platform.
Lift attendants must ensure that lift occupants keep hands, arms and all other body
parts within the lift occupant area and clear of moving parts.
Platform must be positioned at floor level (bridging position) when loading or unloading
in and out of vehicle.
Do not use platform bridge plate or roll stop as a brake. Stop and brake wheelchair
when loading onto the platform (manually stop and brake manual wheelchairs — stop
powered wheelchairs with the wheelchair controls).
Turn powered (electric) wheelchairs off when on lift platform.
Press the DOWN switch until the entire platform rests on ground level (lowered
fully) and the roll stop is fully unfolded (ramp position) before loading or unloading a
passenger at ground level.
Roll stop must be fully unfolded (ramp position) until front and rear wheelchair wheels
cross the barrier when loading or unloading at ground level.
Accidental activation of control switch(es) may cause unintended operation(s).
Maintenance and lubrication procedures must be performed as specified in this manual
by authorized (certified) service personnel.
Replace missing, worn or illegible decals.
Never modify (alter) a BraunAbility lift.
Do not use accessory devices not authorized by BraunAbility
Do not remove any guards or covers.
Keep clear of any hydraulic leak.
Failure to follow these safety precautions may result in serious bodily injury and/or
property damage.
Lift Operation Safety
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
WA RNING
The specifications below reflect CE standards. Lifts meet or exceed these requirements.