background image

Safety information

Fit and use

After care

Limitation of use
General guidance
Before installing and using the wheelchair restraint kits

Equipment storage and maintenance
Warranty

4

6
8

22
23

10

12

14

16
18

20

Fit and use - classic - front tie-down - Solo anchorage
Fit and use - classic - rear - Solo anchorage

Fit and use - classic - front - rail floor
Fit and use - classic - rear - rail floor
Fit and use - heavy duty - front - rail floor
Fit and use - heavy duty - rear - rail floor

2

3

PIN and PIN Heavy Duty wheelchair tie-down

PIN and PIN Heavy Duty wheelchair tie-down

PIN and PIN Heavy Duty 

Wheelchair Tie-down from 

BraunAbility!

Thank you for choosing

In

d

ex

”Declaration of conformity” at the end of the manual.

The following manual is an important part of the product, providing 

you with information on how to achieve maximum performance 

and safe operation. Keep the manual in a safe place so you can refer 

to it when necessary.

If you have any questions about your equipment, please contact us.

Once again, thank you for placing your confidence in our products!

 

 

 

 

Safe vehicle adaptation solutions

For your safety BraunAbility products are

designed and tested according to current

directives and standards.

Содержание P-RQE10MJ



























Отзывы: