Page 17
L211UARS
Series
Lift Models
only
WARNING
Discontinue lift use
immediately if any lift
component does not
operate properly.
Failure to do so may
result in serious
bodily injury and/or
property damage.
there is a smooth (level) transi-
tion between the platform, the
bridge plate assembly and the
vehicle floor. See
Floor Level
Positioning
on page 22.
Inboard Roll Stop:
L211UARS
Series lift platforms are equipped
with a fixed 1" inboard roll stop
(shown below). Attendant
operation is not required for this
roll stop.
Automatic Outboard Roll
Stop:
The automatic cylinder-
powered chain-driven roll stop
provides a ramp for wheelchair
loading and unloading at ground
level. When the platform lowers
fully to ground level, the gas
spring automatically unfolds
(rotates) the roll stop to the
ramp position (
fully
unfolded).
Note:
Outboard roll stop photos
on following page.
Although the outboard roll stop
is lift-powered, the activation of
the roll stop is controlled by the
lift operator (attendant). Press
Pre-Lift Operation Notes and Details
Inboard Roll Stop
