17
Fill the jug (2) halfway with water, add a few
drops of dishwashing soap and follow the
steps as described (Fig. H).
The same procedure applies for the Smoot-
hie2Go bottle (13).
For best results, run the CLEAN program
immediately after use. Make sure to thoroughly
rinse and air-dry the jug after completion of the
program.
Deep Cleaning
We recommend to perform a deep cleaning of
the jug on a monthly basis using a vinegar solu-
tion to remove food residues and stains.
Prepare the vinegar solution in the jug : dilute
500 ml of vinegar (5% acid) in 500 ml of water
(1:1 ratio) and start the CLEAN program. Allow
the mixture to stand in the jug for maximum
5 minutes. Rinse the jug well after each deep
cleaning and allow it to air dry.
Warranty and Service
For detailed information see sepa-
rate warranty and service leaflet or visit
www.braunhousehold.com.
Troubleshooting Guide
Problem
Potential causes
Solution
Blender does not operate
No power supply
Check the fuse/circuit brea-
ker in your home. If none of
the above works, contact
Braun Customer Service
Jug or Smoothie2Go attach-
ment is not attached properly.
Timer shows three dashes
(- - -)
Check the correct position of
the attachment
Liquid is splashing out of the
jug
Gasket is not mounted pro-
perly, loose, or even torn
Ensure that gasket is moun-
ted properly
Jug lid or measuring cap are
not closed properly
Close the lid and measuring
cap
Jug is overfilled
Follow the maximum quantity
recommendation in the pro-
cessing table
Motor base is moving on the
countertop
Rubber feet are not clean
Clean the rubber feet to
ensure a good grip
5722310534_JB9040_INT.indd 17
5722310534_JB9040_INT.indd 17
10.09.21 17:02
10.09.21 17:02
