Braun Independent PowerBrush HS 3, Руководство пользователя

Страница: 4 / 6

How to use
• Before each use check the gas level
á
. To do so, remove the end cap
8
. Change the energy cell when empty (see instructions).
• To aid ignition, hold the product upright. Turn on the gas flow by setting
the switch
2
to the «1» position
à
. Wait 5 seconds
â
.
• Pull the ignition switch back until you hear an audible «click»
ä
.
The on/ready indicator
4
will then light up, confirming that the heating
system is on
ã
.
• The appliance heats up fast and after approximately 90 seconds the on/
ready indicator will turn off: the appliance has reached the optimal
styling temperature and is now ready for use.
A thermostat maintains the optimal styling temperature. The «ready»
indicator may flash briefly during styling, whenever the appliance is
heated up again to maintain a constant temperature.
When you have finished styling
• Turn off the Braun Independent Power Brush by moving the switch
2
to
the «0» position and push the protective cover
7
on the appliance as far
as it will go. The heat resistant protective cover can be placed on the
brush, even if the product is still hot.
Cleaning
Make sure the appliance is switched off and cold.
For cleaning, remove the end cover
6
and pull off the comb lines
å
.
Immerse all removed parts in warm soapy water for a few minutes. Clean
them with a brush, rinse and dry. After cleaning, push the comb lines
back onto the Braun Independent Power Brush. To lock the comb lines,
push back the cover
ç
, first on the slit and then the opposite side against
the direction of the arrow, until it locks . The handle
1
and the protective
cover
7
may only be wiped with a soft damp cloth.
Never immerse the appliance in water.
Subject to change without notice.
This product conforms to the EMC-Requirements as laid down
by the Council Directive 89/336/EEC
.
3585065.fm Seite 4 Donnerstag, 2. August 2001 1:53 13