Braun BPW200AR, Руководство пользователя

Страница: 6 / 21

8
9
1 2
!
3.
7 Sec.
3.
7 Sec.
3.
7 Sec.
1 2 3
Average & memory functions
Your VitalScan 3 blood pressure monitor will automatically store 90 measurements
(VitalScan 1 model: 10 measurements). Storing is done automatically after each
completed measurement. The memory is nonvolatile. This means that you will not lose
stored data when changing batteries. However, the memory can be cleared manually.
See Deleting all measurements on page 9.
The VitalScan 3 model features an Average function to display the average
reading of the last three measurements.
Note: Average readings feature is NOT available in the VitalScan 1 model.
Recalling average readings (VitalScan 3 only)
1. To recall average readings, press button.
The average of the 3 last readings will display
along with average icon
.
2. To exit, turn device off by pressing button.
Recalling stored readings (VitalScan 1 and VitalScan 3)
1. Press memory button once for average of existing memories (this step is for
VitalScan 3 only. See Recalling average readings above.) Then press button
again. Memory icon will appear and a number will briefly appear in the
pulse field. This number indicates which memory is being recalled. Then, the
recalled measurement will display.
2. Repeatedly pressing the button will call up one by one all stored readings.
The number of the memory will appear first, followed by the measurement.
3. To exit the memory mode, press the
button.
Deleting all measurements
IMPORTANT: Before proceeding to clear all the memory, make sure you don’t have
to make reference to the readings in the future.
1. In shut off mode, press button for at least 7 seconds until CL appears
in display.
2. When you release the button, CL will flash.
3. Press the button one more time and 3 short beeps will sound, CL will
disappear which indicates all stored readings have been deleted.
Battery charge indicator
Batteries almost discharged
When the batteries are approximately 75% used the
battery symbol will flash. The monitor will continue to
measure reliably, but new batteries should be obtained.
Batteries discharged—replacements required
!
When the batteries are dead, the battery symbol
will flash empty, display will go blank and 3 beeps will
sound. You cannot take any further measurements
and must replace the batteries.