Page 29
Platform Angle Adjustment Instructions
Adjustment Allen screws are provided on each side
of the lift platform for adjusting the platform angle.
Turn the adjustment screw
clockwise
to
raise
the
outboard end
of the platform. Turn the adjustment
screw
counterclockwise
to
lower
the
outboard
end
of the platform.
Note: Both
adjustment screws
must be adjusted equally
. Adjust platform angle
as needed. See Figure U on previous page. Apply
Loctite
®
to adjustment screws following adjustment.
Loosen (turn
counterclock-
wise
) to
lower
outboard end
of platform.
Tighten (turn
clockwise
) to
raise outboard
end
of platform.
Platform Angle
Adjustment Screws
Adjustment Screw
Allen Head
Floor Level Adjustment
and
Platform Stop
Blocks:
Platform stop blocks and floor level
positioning must be viewed during platform
angle adjustment procedures.
Stop blocks
must be making full contact with the
vertical arms
when the platform is at floor
level (details on pages 30 and 31).
A
B
C
Adjustment
Screw
Allen Head
Stop Block
Содержание CENTURY CL917IB
Страница 58: ...Page 38 Note Note This page intentionally left blank...
Страница 94: ......
