7
The mark of remaining amount of batteries indicates a voltage. When load is applied to the motor handpiece,
the mark of remaining amount of batteries appears to become lower.
NOTICE
• AUTO REVERSE Key
The auto reverse mode can be selected by this key. (Refer to P.11 “ Auto Reverse Function.”)
LCD
The present auto reverse mode mark is displayed.
• MEMORIZE Key
This key can preset program setting (rotation speed, torque limit value, gear ratio, auto reverse mode) and selecting
the program. (Refer to P.12 6. (1) “Program”)
• CHARGE Lamp (Orange)
This lamp lights or flashes while the batteries are being charged, in the battery refresh mode, (Refer to P.13 6. (3)
“Battery Refresh”) or an error has occured, regardless of the ON or OFF position of the power.
LCD
The battery mark will always be displayed even if the unit is powered OFF. The mark will be animated when the
batteries are being charged or in the refresh mode (Refer to P.13 6. (3) “Battery Refresh”)
.
• AC IN Lamp (Green)
The lamp light will always be displayed when power is supplied by the AC adapter even if the unit is powered OFF
AUTO REVERSE If the load is removed after auto reverse rotation, it returns to the normal rotation again.
Full charge or nearly full charge.
About 30-80% remains.
Less than about 30% remains. In this state, the auto reverse function may not activate. (Refer to P.11
“ Auto Reverse Function”)
Batteries are drained or remarkably low voltage. Charge the batteries.
AUTO STOP If the load is removed after autoreverse rotation, it stops.
AUTO REVERSE OFF Auto reverse rotation is not activated.
*There is no display.
