PORTOFINO RESTYLING
rev.4 - 03/2008
Problem: Water or steam leakages occur under the tap knobs during opening
- Cause 1: tap axis seals defective
Cures: check and replace if necessary
Problem: A loss between the group and the filter holder occurs during delivery
Cause 1: underpan seal defective
Cures: replace
- Cause 2: edge of filter irregular
Cures: replace
Problem: Loss of water from the block ring-nut
- Cause 1: seal defective
Cures: replace
Problem: Loss of water from the block ring-nut during manual loading
- Cause 1: tap axis seal defective
Cures: replace
SHUT-DOWN AND DISMANTLING
Shutting the machine down should be done by authorized personnel. For this purpose one must eliminate the pressure from the hydraulic circuit, disconnect
the electric flex from the mains power supply network and dispose of substances which are potentially harmful to the environment. Place the machine in a
suitable place, out of the reach of children or unsuitable people.
For dismantling the machine as refuse, return it to the supplier or take it to an authorized refuse collection centre.
Do not dispose of it in the environment.
