Brasilia Excelsior, Инструкция по эксплуатации

Страница: 22 / 28

Rev 0 - 09-2008 ENGLISH / 19
• Detach the filter holder and remove the dirt that has
collected in the blank filter by washing it with running
water.
Re-attach the filter to the group, enter the programming
stage and repeat the washing cycle without pouring
detergent into the blank filter; this will act as a rinsing
cycle.
• Once the rinsing cycle is over remove the blank filter
and reattach the normal filter, then dispense one or two
coffees so as to remove any bad flavours.
Repeat the automatic washing operations on all
the machine’s groups.
6.3 DAILY CLEANING
Cleaning the wands
• At the end of every day, so as to avoid bacteria or
incrustations that could compromise the machine’s
proper functioning and the quality of the product di-
spensed, carefully clean wands (1) and (2).
Cleaning the dispensing group
• Clean the funnel (3), cup gasket (4), and filter hol-
der runners on the dispensing groups (5) using a
cloth/sponge and a soft brush.
• Rinse the filters and filter holders in hot water using
a specific detergent, so as to remove greasy coffee
deposits.
Cleaning the basin and the cup grid
• Remove the discharge water basin (6) (using the
specific button located below the machine’s body)
and clean it with running water.
Cleaning the body
• Use a non abrasive damp cloth on all surfaces. Do
not use products containing alcohol or ammonia, as
they might damage the machine’s components.