Brasch GDCP-A, Инструкция по эксплуатации

Страница: 23 / 35

23
3-5.4 Sensors
Press the following keys in the noted sequence to enter or change the sensor
program.
Press “MENU”
Press “ENT”
Press “NEXT” until Program Sensor choice
Press “ENT”
Press “NEXT” until sensor number correct
** Press “ENT”
Press “ENT” to choose to set Low Alert PPM
Press “NEXT” until Low Alert PPM correct
Press “ENT”
Press “NEXT” to assign zones to this sensor
Press “ENT”
Press “NEXT” to set zone to ON or OFF
Press “ENT”
* Press “NEXT” to set next zone ON or OFF
Press “ENT”
(* Repeat until six zones are assigned)
Press “NEXT” (if programming more
sensors)
(** Jump back to program next
sensor)
OR
Press “MENU” (If all sensors
programmed)
3-5.5 Zones
Press the following keys in the noted sequence to enter or change the zone
program.
Press “MENU”
Press “ENT”
Press “NEXT” until Program Zone choice
Press “ENT”
Press “NEXT” until zone number is correct
* Press “ENT”
Press “NEXT” until exhaust type correct
Press “ENT”
Press “NEXT” until zone delay minutes are correct
Press “ENT”
Press “NEXT” until next zone number correct
(* Jump back to program more zones)
OR
Press “MENU” (If all zones programmed)