25
(* Jump back to set the next zone)
OR
Press “MENU” for main display
3-5.8
Power Restore After a Power Interruption
Press the following keys in the noted sequence to enter or change the power
restore program.
Press “MENU”
Press “ENT”
Press “NEXT” until Program Power Back choice
Press “ENT”
Press “NEXT” until active zone number is correct
* Press “NEXT” until ON or OFF choice is correct
Press “ENT”
(* Jump back to set the next active zone)
OR
Press “MENU” for the main display
3-6
Status Check
3-6.1
The status of the programmable functions that can be checked by the operator
are detailed below. By pressing the keys in the noted sequence, the operator will
be able to read the status of these specific functions.
3-6.2
Sensors
Press the following keys in the noted sequence to read the status of the sensors.
Press “MENU”
Press “NEXT” until Check System Status is correct
Press “ENT”
Press “NEXT” until Sensor Status is correct
* Press “ENT”
Press “NEXT” until sensor number is correct
Press “ENT” to read sensor Low Alert trigger point
Press “NEXT” to read actual sensor concentration
Press “NEXT” to read zones assigned to this sensor
Press “NEXT” to choose next sensor
(* Jump back to check more sensors)
OR
Press “MENU” for main display
Содержание GDCP-A
Страница 17: ......
