![Brant Radiant Heaters AG2-20-65 Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/brant-radiant-heaters/ag2-20-65/ag2-20-65_manual_2802214023.webp)
AG2
Series
23
Final Heater Assembly
20 Foot
50 Foot
30 Foot
40 Foot
Burner Control Box
w/16 in. Burner Tube
Key
Expansion Joint on
Reflectors
Secured Joint on
Reflectors
Primary Combustion
Chamber with Clamp
Radiant Tube
Exchanger with Clamp
Baffle Location
Secure vent material to exchanger with three #8
sheet metal screws. Seal with high temperature
silicone sealant. Do not use tube clamp.
3.0
Installation
•
Final Heater Assembly
Stainless steel clamp on 150,000 BTU/h models (P/N: TP-220).
NOTE:
Refer to Page 3, Specifications Chart to identify specific models combustion chambers.
Important!
The combustion chamber & radiant tube sections must be installed in the following order.
Stainless steel clamp on 150,000 BTU/h models (P/N: TP-220).
NOTE:
When securing joints on reflectors
which are rotated on an angle from horizontal,
secure joint only on top side of reflector to allow
for sufficient heater expansion and contraction.
Содержание AG2-20-65
Страница 49: ...This page intentionally left blank AG2 Series 49...
Страница 55: ...This page intentionally left blank AG2 Series 55...