MANUAL P/N 900000108 REV D
44
6
Uploading Firmware
To upload new firmware for the ENTA, the user will need a software application such as AutoUpdate,
the IP address of the ENTA, and the file name of the new released file. Follow the steps listed below to
upload new firmware for the ENTA. Please note that AutoUpdate uses unicast on UDP port 20034.
1.
Double click on the AutoUpdate icon and
Figure 23
will be displayed.
Figure 23 AutoUpdate Screen
2.
Enter the IP address of the ENTA in the IP address field. If the user does not know the IP
address, press the Find button and
Figure 24
will be displayed. Locate and click on the IP
address of the unit and click the OK button. The IP address field will be completed for you. If
the unit is not on the list, click the Search Again button.
Figure 24 Find NetBurners Screen
3.
Enter the path name to the new released file. If the user does not know the path name, press
the Browse button and
Figure 25
will be displayed. Locate and click on the file and click the
Open button. The file will be in the form ‘
925000062A ENTA2v1.00Build 1129_APP.s19’
. The
File Name field will be completed for you.
