MANUAL P/N 900000108 REV D
38
5.1.5.5.1
Community
The Community consists of two fields, the Read Community and Write Community. The Community
allows the user to enter the read community and write community names. Once the community names
are entered, they are stored in non-volatile memory and will be recalled when the ENTA is powered up.
Table 7
describes the read/write commands used by SNMP.
COMMAND
DESCRIPTION
Read
Used by NMS to monitor devices.
Write
Used by NMS to control devices.
Table 7 SNMP R/W Commands
5.1.5.5.2
Trap Address
The Trap Address consists of one field, the Trap IP. The Trap Address allows the user to enter the IP
address of the trap. Once the trap address is entered, it is stored in non-volatile memory and will be
recalled when the ENTA is powered up.
Table 8
describes the trap command used by SNMP.
COMMAND
DESCRIPTION
Trap
Used by devices to report events to NMS.
Table 8 SNMP Trap Command
5.1.5.5.3
MIB
The MIB consists of one field, the Download MIB File. The Download MIB File allows the user to
download and view the MIB file used by the ENTA system.
5.1.5.5.4
Status Monitoring via SNMP
The ENTA status should not be requested more often than every 10 seconds. After the ENTA is
powered up, the statuses will be invalid for approximately 1 minute (zeroes will be returned).
