Brandt WTD 6284K, Руководство пользователя

Страница: 26 / 35

59
EN
5 / EVERYDAY MAINTENANCE OF YOUR APPLIANCE
•Cleaning the detergent dispenser
Clean the detergent dispenser regularly.
To do this:
— Push the button forwards and
pull the dis-
penser upwards (Fig. 18).
— Hold the dispenser under the hot water tap
to thoroughly clean the inside of the compart-
ments and the water intake areas.
— For easier cleaning of the fabric softener
compartment, it has a
removable siphon
(coloured part). Make sure you replace it cor-
rectly after cleaning.
— Then replace the entire detergent dispenser
in its housing, making sure it is positioned cor-
rectly.
•Cleaning the pump filter
Important :
If you do not clean the pump filter regu-
larly, your machine's performance may be
compromised.
Important :
First program emptying then discon-
nect the power supply.
To clean the pump filter :
— Remove the baseboard
(Fig. 19).
— Place a flat recipient under the pump
access.
— If your machine has a drain pipe, take it out
by detaching the cap from the base
(Fig. 20).
— Open the cap at the end of the pipe and let
the water flow into the recipient
(Fig. 20).
— Close the cap, making sure that it is pushed
down and reattach it in the base.
— Unscrew the cap of the drainage pump filter
(Fig. 21).
— Clean the filter.
— To replace it, insert it and point the small lug
on the cylindrical surface upwards
(Fig. 22).
— Screw the cap back on as far as it will go
(Fig. 22).
— Replace the baseboard in its original posi-
tion.
Important :
At the next wash, check that there is no
leak during the filling phase.
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22