Brandt WTD 6284K, Руководство пользователя

Страница: 27 / 35

60
EN
5 / EVERYDAY MAINTENANCE OF YOUR APPLIANCE
•Access to the bottom of the tank
Removing the vane from the drum :
If an item of laundry falls between the drum
and the vane:
— Close the drum after emptying it.
— Turn the drum until the vane attaches.
— Unscrew and remove the 2 screws
(TORX T20 recesses), the vane falls into the
drum. Take the precaution of placing a towel
to cushion the fall
(Fig. 23).
— Turn the drum around and open it.
— Pick up the fallen part through the openings
created by removal of the vane.
— To refit, insert the vane, from front to back,
into its housing.
— Close the drum and turn it around.
— Hold the vane while you place the screws.
•Cleaning the drying filter
Important :
The filter must be cleaned after every
drying cycle.
The purpose of this filter is to catch the lint
that forms during drying, so that it does not
enter the air circulation system.
To clean the drying filter, proceed as follows:
— open the machine lid.
— the filter handle is on the right, near to the
drum opening.
— remove the filter from its housing by pulling
it towards you
(Fig. 24).
— clean it without wetting it by pulling off the
thin layer of lint covering it.
— return the filter to its housing, pushing it
firmly into place.
A A
A
Fig. 23
Fig. 24