Brandt WTD 6284K, Руководство пользователя

Страница: 30 / 35

63
EN
6 / INCIDENTS THAT MAY OCCUR
Problems : Possible causes / Remedies :
The machine does not empty :
- you have programed "Full tank stop."
- the drainage pump or filter are blocked: clean these
parts
- the discharge pipe is bent or flattened.
The load is not spun or insufficiently
spun : - you have selected a program without spin, for exam-
ple "Draining".
- The spin safety feature has detected poor distribution
of the load in the drum: unpile the laundry and pro-
gram another spin phase
The lid does not open : - the program is not yet finished: the lid remains locked
for the duration of the program, and for as long as
the temperature remains too high (this may take a
few minutes)
The drying cycle does not start : - you have not selected a drying time
- the estimated load is too large to combine automati-
cally with drying (a flashing number 4 is displayed)
The laundry is not as dry as you
wish it to be : - the drying program chosen is not suitable for the
type of laundry in the machine (Pay attention to the
information given on the clothing labels)
- the drying time selected is not suitable: increase or
reduce the drying time according to the degree of
drying required
- the load of dried laundry is larger than the maximum
load permitted (see Determination of the laundry load
in the "SORTING THE LAUNDRY" chapter and the
maximum loads permitted in the program table)
- the laundry to be dried has not been spun sufficiently
- with a washing program with subsequent drying: the
load is not properly spread out. Automatic detection
of the end of drying has stopped the drying cycle
prematurely.
You want to run a wash only, but a
drying cycle follows automatically : - you have selected the "Drying" option
Important :
Generally speaking, and regardless of the anomaly observed, the machine should be stop-
ped, the power cord disconnected and the water intake valve closed.