Brandt VF 300 Series, Руководство по эксплуатации

Страница: 15 / 27

29
28
Description of your dishwasher Description of your dishwasher
The above photograph of the machine with the lower basket removed shows
you all the main components described in these operating instructions.
Your dishwasher is fitted with safety systems protecting you from flooding:
The ANTI-OVERFLOW SYSTEM . This system automatically activates
the drain pump if the water in the tub reaches an abnormal level.
The ANTI-LEAK SYSTEM . This system cuts off the water supply if a
leak is detected under the machine.
Please read your dishwasher’s installation and operating
manuals carefully so that your machine will provide full and
complete satisfaction. These will enable you to discover all
the advantages of this machine and put them to best use.
Regenerating
salt reservoir
Waste filters
Washing product
container
Rinsing agent
container
Lower sprinkling
arm
Information
plate (After-
Sales service
reference)
Drying valve
(depending on
the model)
Upper basket
Main filter
Anti-blocking
size wire
Control panel (Described
on the next page)
START/STOP: Press
this button to
switch your dish-
washer on.
START/CANCEL:
Pressing this button
starts this
programme. The
programme begins
when you close the
door. Holding the
button pressed down
for 2 seconds cancels
the Programme.
PROGRAMME BUTTONS:
Press one of these buttons
to select your programme.
SALT LIGHT: This
indicates that
there is no
regenerating salt.
RINSE AID : This
indicates that
there is no rinse
aid.
END OF PROGRAMME
LIGHT: this shows you
that the washing cycle
has finished.
The control panel in the top of the door can be seen
when you open the door
WASHING LIGHT:
this shows you
that the washing
programme is
running.